lOOk HERE! Classic FAST and other parts going to Norwalk

[turbodave231]

Classic Fast SFI setup with a program for 55# injectors. Comes with Interface harness and O2 sensor This system has been upgraded by Craig Smith to accept any NTK WBO2 sensor. System has been tested and performs flawlessly $1100

Low hour tested NTK WBO2 sensor for Classic FAST $150

Innovative Boost controller bought new from Jack Cotton in 2006 Version H software. Compete with all harnesses and CD rom $350

Precision FMIC no pipes. Excellent condition $300

AC eliminator pulley $25

2 sets of 2 dot connecting rods. Cleaned, magnafluxed and resized Big ends. $75 a set

Turbonetics Racegate used but in good condition $100

Chrome trans pan with drain plug THM-400 $25

2 Weld Prostar 15 X 8 with 3.5" BS drilled for rim screws. Has Hoosier 30 X 9 radial slicks mounted on them. Slicks have at least a few passes left in them.
Center caps included. Nice condition. $200

14" K&N air filter 3" inlet $25

6 Blue top 36# injectors and a Red Armstrong chip $150

 

[turbodave231]

Some Pictures

 

[turbodave231]

More pics

 

[TurboCrazy]

You have a PM.

 

[2toneNV]

Interested in Precision FMIC without pipes. Any pics, Dave?

 

[tonysmach]

Dave, interested in the weld wheels and slicks. Will 30 inch fit my GN?

 

[jetmech]

ill take the ac delete pulley. if you will ship it.

 

[LOT]

race gate

That is a Race gate and not a Delta gate, right? If so, I'll take it for a spare.
765-602-0997 Call me and I'll try to arrange for someone to pick it up. Lee Thompson

 

[Kip]

Lee, if you need me to I can pick it up for you. Just give me a call and let me know.

See ya, Kip

 

[turbodave231]

Lee,

Yes Racegate, Not Delta. I'll tag it for you.

Dave

 

[turbodave231]

Tony,

The 30x9's won't fit an unmodified wheel well. I'd recommend a 26 X10 or a 28x9 for your combo. 26x10 might rub the frame a little but the 28x9 will fit the best. Let me know if you want them, so I don't have to haul them down to Norwalk.

Dave

2ToneWE4: here is a picture of the IC. I'd rather sell it local to avoid shipping, but if it doesn't sell........

You can see the intercooler through the grill if you look close!!!!!

Dave

 

[LOT]

done deal

Get it to Kip and I'll send payment if that is OK. PM me an address. Thank you.

 

[tonysmach]

"The 30x9's won't fit an unmodified wheel well. I'd recommend a 26 X10 or a 28x9 for your combo. 26x10 might rub the frame a little but the 28x9 will fit the best. Let me know if you want them, so I don't have to haul them down to Norwalk."

I will pass on wheels. Not looking to modify wheel wells. See you in Norwalk.
Tony

 

[Kip]

Get it to Kip and I'll send payment if that is OK. PM me an address. Thank you.

Will do Lee. The thumbsucker already called so I knew it was on.



Dave, if I do not find you look for me around the THS race class.



See ya, Kip

 

[turbodave231]

Innovative Boost Controller sold
Wastegate sold

 

[jetmech]

Do you want to ship the a/c delete, or is this just going to Norwalk. If youll ship ill take it.

 

[turbodave231]

Sale pending on FAST system

FMIC still available

 

[BLACK MAGIC RACING]

still have the wheels?