Looking for on the car valve spring compressor.

I can make you one if you still need one let me know
 
There simple to make cost next to nothing.
d2449b7b3ea56cefd974336ce16dd7ed.jpg


Sent from my SM-G930T using Tapatalk
 
There you go go ahead and make one they are pretty easy to make as stated.
 
Thanks Earl I have that one and it would not work on part of them.

I ended up making one like I saw on the board out of some stock rockers and shaft that I got from Bo McDonald.

And "dank GN" is also sending me one (that may be completed)

At first it was slow going, but as I went along while using it I made adjustments that speed it up to a better pace.

My AFRs went from rock steady 13.0 to 11.5 dancing around and what I can't figure out yet is by changing the push rods and springs only, the main belt (and only)became to short. It was really causing the adjuster to bottom out. Installed a shorter belt.

Rained all day today so hopefully will take it for a drive tomorrow.

Thanks all
 
Hose clamp on the devil device.


...and don't forget to pop the retainer with a hammer first to crack loose the taper lock.
 
Top