Misc Parts (Crank, comp springs, ic brkts, 2 dot rods, front cover, and other stuff)

[fullahotair]

Just looking to clear out the garage of some stuff...

1. Comp 980/979 valve springs I bought them used several years ago, but never had an oppurtunity to install them - $30

2. Nickel plated up-pipe with hole for alky. A friend of mine is in the plating business and did this one for me... - $30

3. IC brackets - both - $30

4. IC Fan Spacer- $25

5. Auto Meter Water Temp Gauge - never used....$30

6. Stock 86/87 upper plenum - $25

7. Crank .010/.010 turbo crank with rolled fillets - no issues when removed, been stored a while. I am not a machinist, but would expect a polish at a minimum - $75

8. set of 2 dot rods with std. hyper pistons - $50

9. IC FAN - someone rattle canned it silver - $10

Photos can be viewed here...

stuff for sale pictures from cars photos on webshots

All prices are plus shipping.

Thanks,
Nate

 

[fullahotair]

open to offers on these items, rather see them used than taking up space on my shelf!

Thanks,
Nate

 

[87buickracer]

I will take crank for 70.00 shipped.pending picu will pm u info later after work ty

Crank

 

[fullahotair]

Thanks for the offer, but i'll decline. Not knowing where you are in Florida I assumed Miami. The crank itself weighs 45 lbs so i entered 50lbs for package weight, and I assumed a box dimension of 30" x12" x 12". UPS site says it'll cost $50 to ship it, so I would be selling the crank for $20


thanks,
Nate

 

[Goat]

If you have this when I get paid I will buy it

 

[87buickracer]

Thanks for the offer, but i'll decline. Not knowing where you are in Florida I assumed Miami. The crank itself weighs 45 lbs so i entered 50lbs for package weight, and I assumed a box dimension of 30" x12" x 12". UPS site says it'll cost $50 to ship it, so I would be selling the crank for $20


thanks,
Nate

I'm in orlando ,fl..shipping on cranks is roughly 25.00 to 35.00 if packaged correctly or put in a crank box..I usually pick mine up from machine shop.they always have extra boxes..after looking at the pictures one of the journals looks like the crank will need to clean up at 20/20....that's about $135.00 to turn and another $250.00 to balance rotating assemble. at my machine shop they don't cut corners..
so I will offer $99.00 shipped...
Let me know ..thanks,,

 

[fullahotair]

The crank is sold pending payment. If the deal falls through, I'll report back...

Thanks for the good idea on stopping by the local machine shop for a box. The price I quoted was based purely on what the UPS site indicated...


87buickracer i sent you a PM about some other stuff though...


Thanks,
Nate