By registering with us, you'll be able to discuss, share and private message with other members of our community.
SignUp Now!HR driver's mount and a stock one for the passenger side. I installed both HR mounts and couldn't stand the vibration and interior rattles. I drive my car a lot on the street and this way worked great for me.Need some good motor mounts something that will hold and not break, any ideals?
HR driver's mount and a stock one for the passenger side. I installed both HR mounts and couldn't stand the vibration and interior rattles. I drive my car a lot on the street and this way worked great for me.
I may have an alternative here Jim. If you find the center of the mount you can drill through it and use a bolt to hold everything together. There are a few post about doing it but the rubber will still deteriorate and you'll need to replace them sooner or later. They won't rip apart and they're not solid after all.![]()
I just idled the car with both mounts and it drove me crazy with all the new rattles. I did no break in time. Maybe I should have left the passenger one in for a while.Nothing wrong witg using both mounts...they have changed their poly over the years to be a bit softer and they do "break in" some with time.
I just idled the car with both mounts and it drove me crazy with all the new rattles. I did no break in time. Maybe I should have left the passenger one in for a while.
Well get some new ones then Jim, they're cheap, just like your president.Sounds like a good fix but i tossed them allready
lol and youres too.Well get some new ones then Jim, they're cheap, just like your president.![]()