PCV Elimination Plug

[79Poncho231]

The size of the GM OEM grommet is .940”.
I suspect the hole in the intake is slightly smaller.
That should get you close for an expanding plug.
View attachment 406768

If you decide to use a fitting in the grommet, it’s right at .500”.
View attachment 406769

Is that for the Intake ?

 

[1986 Buick GX1]

Is that for the Intake ?

Yes. This is for the intake (PCV valve).

 

[GNVYUS 1]

Vacuum 6

Are you the guy pulling on the crankcase from the fuel pump block off plate?

If so please post that pic.
I think those of us pushing some boost could use a block off plate that has an 8an fitting on it that we could also run to a catch can and then never deal with any of these breather pukes and pcv issues.

 

[THensley]

Vacuum 6

Are you the guy pulling on the crankcase from the fuel pump block off plate?

If so please post that pic.
I think those of us pushing some boost could use a block off plate that has an 8an fitting on it that we could also run to a catch can and then never deal with any of these breather pukes and pcv issues.

I think that would be a very oily environment for ventilation .

 

[vacuum 6]

I'll get pics tonight.