You can type here any text you want

PTE 6768 Turbo and GN1 SLIC ATR Cross flow exh and DLS 3" downpipe

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

turbobuick

Well-Known Member
Staff member
Joined
Jun 18, 2001
Messages
1,493
I am upgrading the Ttype

The turbo is a billet wheel 6768 jnrl bearing I bought in 2012 or so. It has about 2k miles on it and no issues. $450
1749951665386.jpeg

1749951685648.jpeg

1749951701119.jpeg

GN1 Performance SLIC. Has cosmetic damage that was the result of a something under it towing. It dented the bottom of the IC. There is also a mark in the tank from the steering arm at full lock it would rub the side of the IC. Can probably be adjusted. I had to modify the passenger side bracket for clearance of oil cooler lines. I am including the alum inlet pipe with IAT sensor along with hoses and clamps. $450
1749952337215.jpeg

1749952452220.jpeg

1749952475803.jpeg

1749952494090.jpeg

1749952515842.jpeg

1749952606838.jpeg

ATR Crossflow exhaust. I had it completely polished but it will need gone over again since it has been on the car for a few years now. Still in good shape just needs cleaned up. $750

DLS 3" SS downpipe, it fits but not that great. It has been on the car for 14 years though. $275

Pic is from 2020 and it does not look this good still. I will get pics they are still on the car
1749952849065.jpeg



I will get pics of the above would prefer in person deal. Package deals available.
 
Back
Top