You can type here any text you want

question for Eric...

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

mikes86ttop

Well-Known Member
TurboBuick.Com Supporter!
Joined
Dec 26, 2010
Messages
1,101
Just wondering If I could get some info on a chip I got with some injectors and would it be ok to run with my setup? info on chip reads:

5.6 4275
50# Street 93
20*-18* 16-18psi
I'm going from another tt chip with stock injectors #6347 28# Street 93 same timing and boost thanks for any info...Mike

I'm running 15 lbs put injectors on but now I've got some low knock #'s happening. Fuel pressure is good and rises 1-1....
 
That chip was made for a much bigger turbo and ported heads, so it will likely be way too rich at WOT for your setup. It will drive around fine, but will get too rich when up in boost.
Eric
 
Thanks Eric, Is it possible I can send you one of the chips to be reburned? Thanks Mike
 
Back
Top