Quick TT chip question...

[BADazzBUICK]

Say if I pulled 3% fuel in overall, would i also have to pull the same % out of 1st gear also to match? or just leave it at 128? ThanX in advance!!

 

[Eric Stage I]

Overall WOT fuel includes 1st gear. So if you subtract 3% WOT fuel, all gears will get leaner at WOT by 3%.

 

[BADazzBUICK]

Thanx Eric. These are just example numbers,I just wanna be sure I got this right. Say im at 125 overall and I could lean out 1st gear only even more (for 60ft reasons) and pull it down to 123? If that is correct should my 1st gear be at 125 now also?

 

[Eric Stage I]

If you take WOT fuel down to 125 (-2.4%), all gears are now leaner by 2.4%.

If you now take 1st gear fuel down to 123 (-3.9%), 1st gear is now 3.9% leaner than the other gears.

 

[Dave]

Its not 1.5 % leaner than the other gears?
3.9% leaner from base?
Confused

 

[Eric Stage I]

1st gear fuel is "offset" from the WOT fuel. When you decrease the WOT fuel, say 5%, that is the new "base" fuel. Then 1st gear subtracts from that.

 

[jcawley3]

Learn something everyday.....