stock I/c parts

[pacecarta]

heres a few stock parts from a FMIC intercooler upgrade

does not include shipping (from 08831 NJ)

notes
coolant fan runs fine , the low speed resistor has a crack at edge

uppipe is not drilled and includes the TB hose and clamps

intercooler shroud just needs a couple rivets (or small bolts) to resecure the scoop at side

 

[buickboy]

PM'd Ya!
Mitch

 

[87granny]

Is that completely stock or a dutt neck intercooler Paulie

 

[pacecarta]

Is that completely stock or a dutt neck intercooler Paulie

this one is completely stock (i have a few stockers all nice )

achilles if you need a dutt necked stock IC .. i have one off my 87 that had the bottom row of fins flattened on the crank side when the fan broke up on ride to cecil , never touched the tubes doesnt leak and the neck i did myself and filled and smoothed ,ported the neck and then took off the dutt lettering and painted it so it looks like a stocker , 150 + ship

 

[pacecarta]

PM'd Ya!
Mitch

Ic shroud sold + shipped , thanks Mitch
air baffle brackets sold + shipped , thanks lorenzo


also found some more used items digging through parts boxes

(a) kirban lower front frame braces (pair of bars with hardware) 40 + ship
(b) kirban rear seat brace kit with hardware(XX bar style)can provide instructs via email 55+ ship
(c) tps tecs (have 2 ) for 86-87 .. 35ea shipped to lower 48
(d) metco driveshaft loop (black 6" round, clears all drive shafts) with bolts 55 shipped to lower 48
(e) 1.5" champion 'GN1' billet plenum spacer 75 shipped to lower 48

 

[NCC1701]

brackets good to go

Sorry,
Ment to do this earlier.
Brackets are good to go
Would buy from him again with no worries
Thanks,
Lorenzo

 

[cml87type]

you still holding these? LMK thanks Clayton

(a) kirban lower front frame braces (pair of bars with hardware) 40 + ship
(b) kirban rear seat brace kit with hardware(XX bar style)can provide instructs via email 55+ ship

 

[cml87type]

you still holding these? LMK thanks Clayton

(a) kirban lower front frame braces (pair of bars with hardware) 40 + ship
(b) kirban rear seat brace kit with hardware(XX bar style)can provide instructs via email 55+ ship

 

[pacecarta]

yes

 

[pacecarta]

update
dutt neck IC --- pending sale local
kirban front frame braces-- sold

heres a pic of the V frame braces i have left 40+ship (only found front frame bolts and nuts as pictured )
also found the long front frame brace that goes under rad support 35 +ship,( this is a grand prix bar ..i dont know if it fits with a stock ic or air dams and i dont have one to check fit but it does fit the regal frame )

 

[pacecarta]

pic of spacer
for stock, 1.5"

 

[pacecarta]

champion GN1 1.5" spacer --SOLD and shipped

 

[usetaboost]

I'll take the seat braces and front cross brace. will you do 100 shipped?

 

[87 WE2]

Is that completely stock or a dutt neck intercooler? "this one is completely stock (i have a few stockers all nice)"

Still have some stock IC's Paul? Looking for a stocker with a nice/decent garret tag on it. Let me know -Ed

 

[pacecarta]

yes i do .

 

[87 WE2]

Check your PM box Paul

 

[usetaboost]

whatever happened with this stuff? I never did get a pm back. Did the items I wanted get sold to someone else?