Wicked new tranny from TCI... Will it work?

[Stroker-ace]

Full auto of fully manual 6 speed in a 4L80E case...

http://www.tciauto.com/WhatsNew/Files/tci6xsix-speedautomatictransmission.pdf

Capable of holding 850HP, fully auto or manual with a ratchet shifter or paddle shifter assembly available...

Will this bolt to our cars? I hope so.

 

[tta1240]

i never had good luck with any tci products.

 

[87natl]

I don't think the bell housing is going to match. Where do the trans lines feed? Maybe modded......

 

[SGRIM]

Pretty sure you would need an aftermarkert ecm for it too...

 

[GNBRETT]

What for? The 200 will hold just as much power and it's drop in.

 

[forcefed3.8's]

IMO, the ratios are too low, too close for a TB.

 

[turbo nasty]

It consumes quite a bit of HP as well.

 

[Super6]

i never had good luck with any tci products.

me neither....i wouldn't buy another trans from them.........Bob

 

[J-B Racing]

Full auto of fully manual 6 speed in a 4L80E case...

http://www.tciauto.com/WhatsNew/Files/tci6xsix-speedautomatictransmission.pdf

Capable of holding 850HP, fully auto or manual with a ratchet shifter or paddle shifter assembly available...

Will this bolt to our cars? I hope so.

Will not Bolt up to the Buick V-6 and too high of gears to work right.

 

[Stroker-ace]

Lots of good info in here.

Thanks for the heads up guys, didnt know if it would work with our cars, glad I asked first