wtb: headers and dowpipe for external gate

[rwrows]

thanks.

 

[DailyDrifter]

Are you looking for a Gate also? I have a DS header, tial 44 WG and a 3" DP that pretty much has to be sold as a package because everything was fitted with each other.

 

[bison]

If you have no heater box ive got a setup that will work with a 4" dp and 3.5" v band discharge and ATR 4 bolt headers. It has an old Racegate that dumps to ambient. This is set up to work with a tangential 4 bolt ex housing. It could be tweaked for a newer style wastegate and plumbed to the dp if needed. The headers and dp are stainless. It has too be sold as a package. $1000

 

[norbs]

I have everything you need TA headers, 3.5 dp tial 48 mm gate PM me for pics.

 

[DailyDrifter]

Are you looking for a Gate also? I have a DS header, tial 44 WG and a 3" DP that pretty much has to be sold as a package because everything was fitted with each other.

That should read Passenger header.......... not driver side

 

[SHADOWII]

If you have no heater box ive got a setup that will work with a 4" dp and 3.5" v band discharge and ATR 4 bolt headers. It has an old Racegate that dumps to ambient. This is set up to work with a tangential 4 bolt ex housing. It could be tweaked for a newer style wastegate and plumbed to the dp if needed. The headers and dp are stainless. It has too be sold as a package. $1000

Bison, that's a good deal, I am looking for something similar. I have ATR 3-bolt headers, but need a 4-bolt. unfortunately I can't give up my htg & a/c unit and the V-band needs to be larger.

 

[2QUICK2B6]

what is a good high boost gate that will fit the ATR ?

 

[bison]

Bison, that's a good deal, I am looking for something similar. I have ATR 3-bolt headers, but need a 4-bolt. unfortunately I can't give up my htg & a/c unit and the V-band needs to be larger.

None of it's pretty but it worked on a 1000+hp combo. The dp is 4" and the v band could be cut off and a new one welded on. Too bad it won't fit with the heater/ac.

 

[bison]

what is a good high boost gate that will fit the ATR ?

You need to have that part fabricated. Typically with v band flanges.