Wtb Th Dp

[ulose2av6]

For ATR headers please.

 

[bison]

For ATR headers please.

No such thing exists. You could start with a 90 degree turn and swing valve assembly and have a fab shop make one. It gets tight with ATR headers because they stick out a lot further than others. You better off going 4 bolt/external gate if your going to change that many parts.

 

[ulose2av6]

no such thing exist? what? I need a Terry houston Dp that will fit atr headers. I have a th dp that was made to fit atr headers. but had to grind out some off it so it would have worked with the lt-76 turbo but went back to te45 some time ago.

 

[bison]

no such thing exist? what? I need a Terry houston Dp that will fit atr headers. I have a th dp that was made to fit atr headers. but had to grind out some off it so it would have worked with the lt-76 turbo but went back to te45 some time ago.

I doubt you have a TH dp then. Maybe a knock off. I dont see why you would have to grind anything to use a 3 bolt 76 turbo either.

 

[Monte231SS]

I have a THDP on my GN with ATR headers. Clears but not by much. I heard something about a few that were made for the ATR headers. The DP for ATR headers seems to go out a little further before bending its way down to the exhaust. Anyways mine is going to be for sale soon. I just got to get it off the car. I can take some pics of it on the car so you can see how it clears. Its mild steel but has an older powder coating job. I'll be looking for $325 for the DP and a stainless test/straight pipe. Let me know if your interested. Thanks

 

[David Husek]

It is for sure a TH downpipe for ATR headers; I sold it to him back in the mid to late 1990’s. I probably still have the receipt somewhere around here for it from RED. It needed to be grinded as it had a thicker flange that restricted air flow on this particular 76 turbo in short. Ulose2av6, don’t get angry, this happens all the time. Give me a call….