2-step for stock ignition systems

[tta1240]

this would go good with my new engine.

 

[TurboBob]

Have ya worked up a price yet?

Shaun

We should have the final numbers this week, but we are still looking at that same approximate price.

Bob

 

[Super6]

interested

i would like one of these when they are ready...........thanks Bob

 

[TurboBob]

We are still on target for March.

I will post back as info becomes available.

Bob

 

[TurboTR]

Yay- finally!

I always assumed you could just make the EST pulse "narrow" that you want to "skip" for a two-setp. Such that the coil module stays in sync since it doesn't skip pulses. But the pulse is narrow enough that it also doesn't charge the coil enough to fire the plug. So in effect, it's like skipping an EST pulse. Never got around to testing this concept though to see if the module could handle narrow pulses.

You still have a powermaster Bob!? hehe

What's the cost going to be?

TurboTR

 

[TurboBob]

a crappy powermaster. I am collecting parts for a hydroboost system, but kept the powermaster on there to test/demonstrate the 2 step.

The EST pulse idea has been tried, and sorta works.

This module works on a different principle. It works well.

Price will be under 250.00


Bob

 

[yullose]

I've got Paypal waiting... just in case you need more guinea pigs to try it.

 

[Eric Stage I]

Here's a quick and dirty vid of me playing around with the 2-step. I probably should not have been aiming at that telephone pole. This is without the 2-step, then with the 2-step at 3500rpm no retard.

Eric

http://www.youtube.com/watch?v=9bJoiVNt9tY

 

[turboc87gn]

...

 

[jasjamz]

Eric, how much boost were you holding on those?

 

[yullose]

Here's a quick and dirty vid of me playing around with the 2-step. I probably should not have been aiming at that telephone pole. This is without the 2-step, then with the 2-step at 3500rpm no retard.

Eric

YouTube - Buick 2-Step

Dayum... you have a GN to play with ?

I thought you just burned chips.

 

[Eric Stage I]

I believe I was around 8-10psi but I wasn't paying real close attention. That was on E85, 120lb injectors, PT72 turbo.

 

[getchasum]

Would love to see one with a boost launch......Would like to see how it reacts & recovers.

 

[TurboBob]

so long as you are not staging with any kind of closed loop activated, the launch is excellent.

Get us another vid Eric!

Bob

 

[TurboBuRick]

Get us another vid Eric!

Ya! Let her rip bro!

 

[jasjamz]

Would love to see one with a boost launch......Would like to see how it reacts & recovers.

I went for a ride with TurboBuRick, he was testing one out. The recovery was great! It quit all the spitting and popping and instantly came alive like a beast. He foot braked the car to like 10 psi and let it rip. The car has Razors alky on it too. I'm telling you guys, you will not be disappointed!

 

[yullose]

Well, my car is back out of the trailer and parked in the garage again. I filled the alky tank and topped off the cell with Sunoco 93.

Had it out today for the first time since early December.

There's a few things I want to get on the car before Spring rolls around... and this gizmo is at the top of that list.

 

[jhanson1750]

Bob, I hope your first run is going to be big enough to supply us all with them!

 

[Super6]

track

i will be taking my car to the track in two weeks..i could get ya'll some good video.........Bob

 

[TurboBuRick]

I went for a ride with TurboBuRick, he was testing one out. The recovery was great! It quit all the spitting and popping and instantly came alive like a beast. He foot braked the car to like 10 psi and let it rip. The car has Razors alky on it too. I'm telling you guys, you will not be disappointed!

I want to get the car back out and play :tongue: but the roads here are too damn salty. The other problem is the temprature. Hard to hook on cold pavement but I could still try. :biggrin: