You can type here any text you want

Bracket and Bolt- Where does it go?

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

SPower6

New Member
Joined
May 27, 2001
Messages
151
When removing my Trans out of my GN (a while back) the TV cable was binding up (or at least that is the cable I remember :)). I unhooked a braket and bolt so I could drop the trans. on my garage floor. Now I have a clip and a bolt that I have no idea where it goes?? I "think" it may of been taped to the TV (or another) cable and think that I had to reach into the engine (way down) to get to it. Sorry for my state of confusion, I have been dealing with a very serious illness that my daughter has. TIA
Jeff
 
If it's a small sheet-metal bracket wrapped around the cable, it used to be stuck under one of the bellhousing bolts on the passenger side.
 
Originally posted by MeanBuicks
If it's a small sheet-metal bracket wrapped around the cable, it used to be stuck under one of the bellhousing bolts on the passenger side.

Thanks Greg! Is it important that I have it in place?
Thanks again!
Regards,
Jeff
 
Back
Top