Cam sencor

[87boostedbuick]

I'm a little confused on what's going on I bought cam sencor tool from kirban it says the window and cap wires should be about 3 o'clock position and after following instruction exactly and setting it as per instructions cam sencor points to 6 o'clock before I started I noticed the cam sencor was 180 deg reversed also

 

[87boostedbuick]

And I understand there's only 2 ways it can go in and at tdc it should point to the drivers side

 

[turbojd]

Maybe this will help you http://www.vortexbuicks-etc.com/cam_sensor.htm

 

[87boostedbuick]

So I set the cam sencor with my tool now as per the instructions and well the car seems to be quicker but likes to stall any ideas?

 

[earlbrown]

The window can actually point in any direction when dropping it in and it work just fine. The reason it's recommend to to point in one direction is to keep from putting the pigtail in a mind or having the cap 'ear' pressing against the hose.

Also, it's a good way to verify you haven't lost a timing set. If you know that it was pointing at #1 at TDC and it's not later on down the road.....