Cruise Control

[Ram Air TTA]

Guys,
Hope someone could shed some light on this, for some reason my cruise doesn't want to work. I have checked for a fuse & checked the accuater switch at the brake pedal (seems to be fine and adjusted). Anybody know what I might be missing???? One more thing the vacuum line seem to be fine. Thanks for any help.



Joe

 

[Jan Larsson]

Hi Joe,

Had the same problem, changed the cruise controll lever and everything works fine again.

This could be your problem as well, the lever is just to twist and pull out and then there's a cable running all the way thrue the steering column to a small connector. I got a replacement lever and hooked it up under the dash to make sure that that was the problem before I pulled to old one out and put the new one in. Took me about an hour in total.

Hope this helps

Jan

 

[Ram Air TTA]

Hey Jan,
Thanks for the info, I'll have to give that a try.

Thanks again,
Joe

 

[Quick89]

Put a vacuum pump on the line to the servo and see if the internal diaphram has a hole in it, that was what was wrong with mine