gas pedal


Oct 20, 2008
Pardon my ignorance for not taking any pictures of the gas pedal assembly when I took it all apart to PC several weeks ago - but can someone explain or better yet take a picture of the pedal assembly assembled? Particularly on the spring is installed and also is there clip or something that should be in the groove on the fulcrum ( or whatever you wanna call it ).


This is from memory ok, I'm not looking at the pedal while writing this.

There is no clip. The pin that goes thru the spring is press-fit into the hole on the side. I used a C-clamp to squeese it back in after everything was lined up. The long arm on the spring goes up so the spring tension pushes the pedal back up (toward the driver). I didn't take a photo when I replaced the pedal, sorry.