gen 2 wot afr tracking

[turb0buick57]

Is there are certain injector size needed to use wot afr tracking with the Gen II like the tt6.1 chips, or will the Gen 2 wot afr tracking work with any size injector? I didn't see this mentioned in the manual or using a search on the board so I was wondering if there is a limit.
Thanks for the help

 

[CGASTON]

You need an EEG chip from Bob Bailey to do AF tracking with Gen II

 

[TurboBuRick]

I want to say 60's are the smallest.

 

[turb0buick57]

Have the ee chip for 42s, I know for tt its 50lb injectors minimum but thats directly stated on erics website. I thought I remember reading 50 or 60lb injectors for the gen 2 also, but I cant find the info or post again where I read that.

 

[Eric Stage I]

The injector size doesn't matter with the Gen II/Extender setup for wideband tracking. Just remember that with 42's, you can very easily hit 100% dc, at which point wideband tracking is useless. As long as you below that, it will work fine.

 

[turb0buick57]

Thanks eric!

 

[hiboom]

Eric
will the v5.6 tt chip work with the gen II

 

[TurboBuRick]

It will work but will not utilize all the gen2 features.


Posted from the TurboBuick.Com mobile app