injectors are showing 150# and cubic inch is showing 235 ..minor details but should be corrected
still see the cam sync precedes is 1 it should be 6 , this affects when the injectors spray and the way it is at 1 its wrong
in system config>ignition parameters.. you have crank reference deg at 1.0 it should be 10.0 degrees with DIS ignition
your VE at idle should eb close to 20 not 40 but theres several tables that need tweaking to accomplish that
the af table sucks (really lean in boost , as does the timing table which has way too much timing for 93 even with alky
do you have oil and fuel logging ..i ask because i see you have low oil enabled (at 20psi which when it warms up and pressure drops below 20 at idle engine will die ) , as well as FP correction
also fan is set 190 on 180 off thats a little warm
do yourself a favor and contact bison or cal hartline for a tune and support , they can do the final tune remotely
this thread really should be in performance ECU forum