Lifter ? with Pics

[Lee Thompson]

My bestest friend believes these to be Crower lifters. Anyone with experience with these? Especially the open tie bar. Tell me all you know!!! Thanks

 

[BlownV6]

LEE, They look like Iskys to me Mike

 

[Big Stu]

LEE, They look like Iskys to me Mike

I agree with mikey, isky they be....

 

[Ron Tarabori]

Yes, they are Isky. That is all I run in my circle track motors. Turn them 8500 and have never had a lifter problem and I don't run a rev kit.

 

[STGMAN]

lifters

Hello Lee,

I ran those lifters twice and both broke the roller and wiped out both cams. Of course, I run 350#'s of seat pressure on stage 2 heads with twin turbo's. The lifters came in 2 busch motors I bought and converted to turbo motors. Maybe less seat pressure and the lifters live, they certainly did in the busch engines. They definately are isky's.

bob

 

[Lee Thompson]

Thanks to all who replied

Hello Lee,

I ran those lifters twice and both broke the roller and wiped out both cams. Of course, I run 350#'s of seat pressure on stage 2 heads with twin turbo's. The lifters came in 2 busch motors I bought and converted to turbo motors. Maybe less seat pressure and the lifters live, they certainly did in the busch engines. They definately are isky's.

bob

STGMAN, I assume you mean 350 # of closed seat pressure==bunch. Just curious as to what you found to hold up to that amount of pressure.
Mine is in the 160 range so should be OK if I decide to use them. The open end links had seem a little scary to me. Thanks

 

[BlownV6]

Lee, I use Iskys at over 400# seat pressure

 

[EightSecV6]

Lee, I use Iskys at over 400# seat pressure

No problems out of mine either, I use rev kits on all the high RPM stuff. You also get the benefit of using a shorter pushrod with the Iskys.

 

[turbodave231]

Definitely Isky. Isky offers a rebuild service for around $11.00 each. They install new rollers, axles and needles.

I'm using these with #360 on the seat with S2 heads.

 

[GARY HARVEY]

Anyone using Jesel Dog Bone Lifter?

i'm needing a part #.

 

[BlownV6]

Gary, I have a set of 16 Jesel tie-bar lifters. These were in a buick headed SBC. I believe these are all .100 off set. Will work perfectly in a stage 2 block with stage 2 heads and have 2 spare sets. Nice Condition $185.00 shipped to your door if intrested. thanks Mike