CS99. what fuel will you be using and what boost levels are you comfortable with?
With a 270 ci setup and the ability to modify your headers to suit, this opens up a lot of possibilities. But, being those headers started life as 3 bolt headers, this will put the turbo in the stock location no matter which flange you decide on using. Clearances will come into play at this point if you go with a larger turbo than say a normal sized T4 chassis turbo. Once you get out of the T4 size turbos and move into mid size turbo land, the CHRA and housings (both compressor cover and turbine housing) get larger. This dramatically affects everything that surrounds the turbo, as well as needing a custom downpipe made to fit.
If you want a turbo that will pretty much bolt on, with only changing the header inlet flange and making a custom downpipe, I would definitely go with a GEN2 PT7675 CEA turbo with their investment casted stainless steel all v-band turbine housing in .96 a/r. This would give you the quickest spool up, easiest to install, and the foot print would be good to go with all of the surrounding accessories and plumbing without too much hassle. Going with the all v-band turbine housing gives you the smoothest flow from the cylinder head, to the turbine wheel. Mainly because everything that leaves the heads stay in a perfect circular tube with very little turbulance in between. Ala, superior aerodynamic flow. The T4 flange transition definitely has turbulance as the exhaust has to transition from round, to rectangular, then back to round before hitting the turbine wheel. One thing to remember about any H size compressor cover equipped T4 turbo is, the rubber S hose off the stock style water pump neck will rub on the compressor cover, but it's no biggie. You would need to run either C-16, E85, or 93 pump with a lot of dual nozzle alky goodness, plus a lot of boost (35-40psi) in order to make 1000 rwhp with this turbo. You also could run into back pressure issues when you start getting the boost that high. It would be a ton of fun on the street and with the CI that size, you shouldn't need a lot of stall to spool it. But, just know this. If you go this route, this is the largest true T4 size turbo that requires the least amount of custom fab work to fit. So you would pretty much be land locked with this turbo and the power it makes. Also, you would need to redo everything, if you upgrade to a mid frame turbo in the future. Even if you went with an old school PT88 with the cantalope T4 turbine housing. And seeing as not many Buick guys/girls run this turbo when trying to make 1000-1200 rwhp, you would be limited on the max rwhp it can make.
https://www.precisionturbo.net/Stre...t-and-Race-Turbocharger---GEN2-PT7675-CEA/606
Now, if fabrication and non stock location is not an issue, IE: you'll make everything around it fit somehow, and you want a turbo that will definitely make the power without having to run 40psi to do it, I would look at a PT8685 Gen 2 CEA with a T4 divided housing in 1.12 a/r to start. Get the 1.28 a/r housing for future power, aka maxing out the turbo. This one would work well with your combo and definitely make the power. But, due to the larger Sportsman style compressor cover, and the larger 4 5/8" downpipe flange, a 4 - 4.5" downpipe will be required. And even though it is dual ball bearing, the stall speed requirements will be higher for quick spool up.
https://www.precisionturbo.net/Stre...t-and-Race-Turbocharger---PT8685-GEN2-CEA/561
Now, these are just the PTE turbos I would recommend if I had your combo and goals. There are other Borg Warner and Garrett turbos out there that will make the power. Most of them are of the mid frame chassis turbos. Most of the TSO racers that are at this power level, either run a PT4788 turbo, or a Pro Mod 88. The serious guys in that class are making over 1400 rwhp. Those combos can turn the boost down and make 1000 rwhp all day.
One things for sure, your goals of 1000 rwhp on your combo are definitely not cheap, nor easy.
Definitely keep us posted and hope some of this helps.
-Patrick-