New Best

[Chris Hogeland]

We took my street car to track Friday night and it went 6.25@111 in the 1/8.
This car has stock Crank and Rods and is A 231 CU.IN Engine.It should run
9.?in the1/4 we have room to go faster.The car in TSM legal. It has A 70-Ptrim turbo And the cars wight is 3580. I would like to thank Dusty Bradford
and Cal Hartline for all the help

 

[Quiky One]

Thats about a 9.90 at 130 and change that would be my guess. Good run!

Jason

 

[Bobs rare 6]

Whats the combo? MPH more like mid to upper 130s! Awesome run! Bob.

 

[Chris Hogeland]

GN1 I have A head porting business so I did the heads killer flow # small Roller Cam stock Headers 70-p trim stock crank stock rods STD Speed Pro
pistons 72 pound INJ F.A.S.T.tuned by Dusty Bradford and Cal Hartline.

 

[Nemesis]

Girdle? What mods to the rear if you don't mind me asking?

 

[John Wilde]

Chris,

Congratulations, you had a better weekend than dusty!

 

[Dusty Bradford]

Chris layed it down Friday night........turns out that was the best thing that happened all weekend for us.

Chris forgot to mention it went a 1.41 60' with all stock rear suspension other than an air bag and ATR sway bar. Considering he's using left over parts from the good car he's a happy guy :biggrin:

 

[86brick]

Congrats on the new best, that is a very impressive pass considering the combo and only a 70Ptrim turbo! 6.25 @111mph in the 1/8 would be something like a 9.80-70 in the 1/4 at around 136-137mph... Least that's my best guess going on the fast stock block Buicks I've seen run down here

 

[John Wilde]

Chris layed it down Friday night........turns out that was the best thing that happened all weekend for us.

Chris forgot to mention it went a 1.41 60' with all stock rear suspension other than an air bag and ATR sway bar. Considering he's using left over parts from the good car he's a happy guy :biggrin:

Wow that is even more impressive knowing what you don't have on the car.
Congratulations, you have a heck of a runner!!!

 

[Chris Hogeland]

Thanks guys I could not have done it with out Dusty he has always been there to help me. I hope we can get his car up and runing in the next week or so.We have alot of work to do on our TSM car to.