TURBOPOWERED68
David
- Joined
- Jan 31, 2006
Can the PL be configured to LOG 12+ Volts??
Basically i am having an a LOW voltage issue in my car i have checked just about everything and i want to make sure that i am chasing something that is actually going on rather made up in my head.
Anyways what id like to do is log the voltage AT the
1-Alt
2-Fuel pump
3-ECM
4-Module
I would move the wire to one item at a time.-- First check one item and if checks out then check the next and so on.
I had the ALT checked on the auto parts store machine and it passed
I had the car checked by the auto part store hand held machine and it passed
BUT
On my PL files in/under boost and RPM it falls pretty low as low as 11.6 a few times and floats around 11.8-12.2.
I did install a Volt booster that seems to work but i still would like to get this fixed with out having the crutch. BTW The volt Booster only brought the voltage up to 14.5 if that means anything.
Basically i am having an a LOW voltage issue in my car i have checked just about everything and i want to make sure that i am chasing something that is actually going on rather made up in my head.
Anyways what id like to do is log the voltage AT the
1-Alt
2-Fuel pump
3-ECM
4-Module
I would move the wire to one item at a time.-- First check one item and if checks out then check the next and so on.
I had the ALT checked on the auto parts store machine and it passed
I had the car checked by the auto part store hand held machine and it passed
BUT
On my PL files in/under boost and RPM it falls pretty low as low as 11.6 a few times and floats around 11.8-12.2.
I did install a Volt booster that seems to work but i still would like to get this fixed with out having the crutch. BTW The volt Booster only brought the voltage up to 14.5 if that means anything.