precision dbb 6466
- Thread starter 66P
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
jasjamz
THS Racer
- Joined
- Sep 30, 2004
- Messages
- 5,983
Correction to my post.. its a 210/215 cam and its over 9.0: 1. So many combinations, I sometimes forget who has what.
After a patented Hartline tune.
What was MPH?
Sorry, I had his screen name wrong. It's Grey Racer. He went 129+
Blood, Sweat and a whole lot of tears
Nah, the surface was so rough, that I took it down by hand with 40. Then I used the little sanding discs about 2 inches in diameter, they go on the end of an air powered tool/drill. Blue first then gray. You can get those at Napa. Then a good old buffing wheel from Harbor Freight Toools and lots off Mothers Mag & Aluminum Polish 
It costs 30 bucks and 3 Monster drinks
But I already had the buffing wheel, which I think it's about 15 bucks.
Nah, the surface was so rough, that I took it down by hand with 40. Then I used the little sanding discs about 2 inches in diameter, they go on the end of an air powered tool/drill. Blue first then gray. You can get those at Napa. Then a good old buffing wheel from Harbor Freight Toools and lots off Mothers Mag & Aluminum Polish It costs 30 bucks and 3 Monster drinks But I already had the buffing wheel, which I think it's about 15 bucks.BGNeXtreem
Member
- Joined
- Apr 20, 2012
- Messages
- 192
Looks sweet great job down side is I'm sure you just voided your warranty:-(
I disagree that the warranty is void. The cartridge is the critical component. Removing/altering the cover externally shouldn't void any warranty since the cartridge wasn't disturbed and he didn't alter the inside of the cover in any way. I've seen ex housings removed and powder coated inside and out. I've seen the turbine seize because the clearance was compromised from coating the inside. In that situation the warranty should not cover the damage.BGNeXtreem said:
BGNeXtreem
Member
- Joined
- Apr 20, 2012
- Messages
- 192
I could be wrong bison I can see manufacturers trying to get out of a warranty rebuild any way possible I wasn't saying that is a fact just my feeling
hungerbuhler1
Active Member
- Joined
- Dec 20, 2009
- Messages
- 958
qws2000 said:
It's worth it. Ask Cal but when we were at track Friday he looked at log of my run and it hit 20#'s in 1/2 a second. Spools crazy fast!
FASTV6HENRY
Member
- Joined
- Feb 16, 2012
- Messages
- 280
this turbo is am awsome street/race turbo.. has lots of power potential and spools fast. you will love it.. i do
How much boost and how fast?
This turbo rocks!!!Spools like no other turbo i've ever had. The best $1,700 i've spent I love hearing this turbo spooling around town, and when I turned my engine off I thought my blower motor was on for a second. Then I realized my turbo was still spinning for at least a minute. This is one bad ass turbo. My stroker loves it, thank you Cal!!
It's way way faster then my Netics 66-p-bb-63 and boost at 20 on my new turbo, it feels like what I had at 26 on that netics. No joke!
I love hearing this turbo spooling around town, and when I turned my engine off I thought my blower motor was on for a second. Then I realized my turbo was still spinning for at least a minute. This is one bad ass turbo. My stroker loves it, thank you Cal!!It's way way faster then my Netics 66-p-bb-63 and boost at 20 on my new turbo, it feels like what I had at 26 on that netics. No joke!FASTV6HENRY
Member
- Joined
- Feb 16, 2012
- Messages
- 280
It hits 20lbs of boost really fast, i have not timed the boost speed. but i know it is one of the fastest spooling turbos i have ever had.
