captrob
Slow GN Fizz!
1) Front lower control arms with Global West delrin bushings. The arms were painted with POR-15 about 20 years ago…pretty good shape, definitely not perfect. Bushings are in great shape about 20 years old and approximately 10,000 miles. Serviced every year with quality high temp grease.
$40 for the pair plus shipping.
2) I have 2 pairs of brand new Summit press in lower ball joints : ½” taller #SUM-77-1130002, or 1” taller #SUM-77-1130003
$70 a pair plus shipping.
Or…
I can press your choice in to above arms if wanted.
$110 plus shipping for pair of arms and pair of ball joints pressed in.
3) Upper Ball joints – Proforged 101-10020 ½” taller bolt-in to front stock upper arms.
$60 for the pair plus shipping.
4) Front Eibach Pro kit lowering springs. About 20 years old, ~10000 miles. Have been sitting on a shelf for the last 10 years.
$50 plus shipping…Heavy
5) 5 Piece Cruz Performance pulley set. Only installed, never run. Billet aluminum pulleys. I switched to black pulleys, so my fashion fickleness is your gain.
$350 shipped to the lower 48 states.
6) Billet throttle body vacuum block – Finned top 86/87 stock style with gasket and SS hardware.
$10 plus shipping.
7) Stock parts … $ just pay shipping
a) 2 86/87 Passenger side valve covers– 1 was polished a long time ago, the other is bare.
b) Stock crank pulley
c) Tensioner pulley
d) Stock turbo inlet with rubber cap
e) Passenger side intercooler bracket
8) Big Brakes for B-Body big bearing tall spindles, (no spindles included) – about 15 years old, ~7000 miles, been sitting on a shelf for about 10 years. Good shape just dirty. All were new parts when I converted to the big brake setup.
Includes: Pairs of each - Rotors, bearings, seals, calipers, pads, pins, and SS hoses
$Free pickup in Keller, TX – North Fort Worth area or meet up in DFW for a social distancing brew.
Too big and heavy to ship unless you want to pay it.
Can also arrange pickup in Keller, TX or meetup in DFW area.
PayPal preferred…captrob@hotmail.com
Thanks, Rob
Rob Pahl
Keller, TX
$40 for the pair plus shipping.
2) I have 2 pairs of brand new Summit press in lower ball joints : ½” taller #SUM-77-1130002, or 1” taller #SUM-77-1130003
$70 a pair plus shipping.
Or…
I can press your choice in to above arms if wanted.
$110 plus shipping for pair of arms and pair of ball joints pressed in.
3) Upper Ball joints – Proforged 101-10020 ½” taller bolt-in to front stock upper arms.
$60 for the pair plus shipping.
4) Front Eibach Pro kit lowering springs. About 20 years old, ~10000 miles. Have been sitting on a shelf for the last 10 years.
$50 plus shipping…Heavy
5) 5 Piece Cruz Performance pulley set. Only installed, never run. Billet aluminum pulleys. I switched to black pulleys, so my fashion fickleness is your gain.
$350 shipped to the lower 48 states.
6) Billet throttle body vacuum block – Finned top 86/87 stock style with gasket and SS hardware.
$10 plus shipping.
7) Stock parts … $ just pay shipping
a) 2 86/87 Passenger side valve covers– 1 was polished a long time ago, the other is bare.
b) Stock crank pulley
c) Tensioner pulley
d) Stock turbo inlet with rubber cap
e) Passenger side intercooler bracket
8) Big Brakes for B-Body big bearing tall spindles, (no spindles included) – about 15 years old, ~7000 miles, been sitting on a shelf for about 10 years. Good shape just dirty. All were new parts when I converted to the big brake setup.
Includes: Pairs of each - Rotors, bearings, seals, calipers, pads, pins, and SS hoses
$Free pickup in Keller, TX – North Fort Worth area or meet up in DFW for a social distancing brew.
Too big and heavy to ship unless you want to pay it.
Can also arrange pickup in Keller, TX or meetup in DFW area.
PayPal preferred…captrob@hotmail.com
Thanks, Rob
Rob Pahl
Keller, TX
