Strange thing happened after coil and module change

[TurboTdr3.8]

I replaced my coil and module and after I changed it I noticed the Caspers Cam sensor Cap led lite was on steady while running and blinked only while cranking , before the old coil and module the led lite on the sensor was blinking while running all the time , has anyone had this to happen , the motor seems to run the same blinking or steady so it was a mystery why this happened . Anybody got a clue

 

[pacecarta]

im still trying to understand why anyone needs that cap

 

[novaderrik]

im still trying to understand why anyone needs that cap

because the factory procedure for setting it is so complicated..

 

[GNVenom]

im still trying to understand why anyone needs that cap

1. You need a new cam sensor cap to replace a defective cap or as a spare,
2 You need to set your cam sensor timing,
3. You don't have a cam tool,
4. You can tweak the injector timing to compensate for big cams.

Hope this helps you understand...

 

[TurboTdr3.8]

because the factory procedure for setting it is so complicated..

you got that right , it makes it a easy job then