You can type here any text you want

Stripping down 10 cars

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
Brian, I am in need of a GN interior trim piece...The plastic a pillar piece that runs along the driver's side of the windshield. The piece that most folks generally put a boost gauge pod on. Do you have a nice grey one in stock? I glanced through your website and didn't see it, but may have missed it. LMK Thx Scott
 
Brian, I am in need of a GN interior trim piece...The plastic a pillar piece that runs along the driver's side of the windshield. The piece that most folks generally put a boost gauge pod on. Do you have a nice grey one in stock? I glanced through your website and didn't see it, but may have missed it. LMK Thx Scott

Scott $30 & shipping . Excellent shape.
 
10-4...Should I call Monday or how should I go about placing the order? Thx
 
Hi Brian..

Have stock 1987 GN

- Antennae plastic base and screw
- GM Radio mounting clips
- Driver side plastic for pull handle and estucheons
- Rear seat complete
- Carpeting

Thanks!!
 
Hi Brian..

Have stock 1987 GN

- Antennae plastic base and screw
- GM Radio mounting clips
- Driver side plastic for pull handle and estucheons
- Rear seat complete
- Carpeting

Thanks!!

Power antenna or manual?
Power we have new or used.GBodyParts.com Online
Manual We have new nut or used nut. The plastic on a manual is only available used.
Radio clips They are $25 a set with hardware.
The driver side escutcheons do you need front rear or both? They are $65 each.
Rear seat complete mint shape $250 average $200. We also sell new covers for $180 upper & lower.
Carpeting I would go new. $155 with rubber backing like the factory it is $249.95.
 
Brian- how much for 4 nice intercooled fender emblems- just the intercooled emblems no grand national section. shipped to 10312?
 
86-87 intake

How much for a complete 86-87 intake throttle body and sensors.Does not need to be clean.Thanks
 
hey brian,
what are you looking to get for the black wheelwell trim all four?
 
How much for a patch panel shown in the pic. You can see the rot. Need to have the support attached that is welded in truck to rear well. A sawzall would work well to get it out.

000_0025.jpg


Here is another pic. Need the piece under this panel from rear quarter to mid speaker area
000_0023.jpg
 
How much for a complete 86-87 intake throttle body and sensors.Does not need to be clean.Thanks

We can yank one off a running motor for you with everything on it. Is that what you need? I'll just unbolt it & we can ship. Have new gaskets if you need to re-install. let me know if you want stock injectors or something bigger. I have a few intakes here. E-mail me back with exactly what you need & don't need. Bweavy@aol.com
 
Back
Top