11.60et @117 14psi

[SGRIM]

KDS looks alot bigger on video :biggrin:

Al are you still coming to the track rental? I am holding two spots for you!

 

[alb1bad6]

Yes, Im still coming, Thanks Shane, Give me a call on the details...

 

[GNVYUS 1]

Wow mid 11's on 14psi, must be nice.

Got any pics of that liquid intercooler??

Why do you still have the heavy and only 7" wide stock rims??

 

[alb1bad6]

I bought a set of centerline convo pros 15x4, 15x10 5' backspacing, with a 275 50 bfg dragradial, and dont like them. I didnt take any pics of them on the car, but they stick out way too far and there is about 1 1/2" to the inside of clearence. I really need a 6 1/2 backspacing but they dont make them, and weld wheels hit the caliper Anybody have any suggestions. Thanks AL I will have some pics soon

PS going to make back to the track one day

 

[Razor]

Factory wheels are 5 inch back spacing. Maybe a 15x8 with a 5 inch back spacing.

The 4th gens have 5.5 back spacing.

Is the rear factory? Or factory width

 

[alb1bad6]

Factory rear....Even with the factory rear wheel with a 255 tire there is over a inch clearence. I tryed a 15x9 with 5.5 that was about perfect, but the calipers hit the middle of the inner rim, about a 1/4". Is there any other calipers that I could use

 

[Razor]

Dont know if this can be done, a lot of the 4th gen guys will get a die grinder and grind some of the ribs of the caliper.

I'm contemplating going to different wheels and tires.. so I am in the same boat. My difference is I have the 9 inch rear.

See if I can get some 4th gen rear wheel to trial fit.

 

[alb1bad6]

Its only two places on the caliper that hit, so I may give it a shot