Any injectors larger than 80lbs high impedence?

[the wrath]

Trying to see if there is a larger injector I can use without getting a modded ecm?

 

[dank GN]

Sure there is . It's just the price goes through the roof . Precision makes 160 that are high impedance for about 200 each I believe . There is plenty of choices just google high impudence injectors . I'm running low impedance 160s with a modded ecm and I have not had a issue with them

 

[Chuck Leeper]

80's at 60psi = 94. Enough?

 

[michael evans]

I have a modified computer (Red's) that I took out of my running regal to convert to FAST that I will sell. It will save you money in the long run.

So you know it also has the power logger attached.

 

[Jerryl]

Review the minimum injector pulse width and latency specs for the big injectors.
Depending on the fuel/base pressure, you may not be able to get to a low enough pulse width, for the desired idle AFR. Sure, idle rpm can be raised to compensate some, but may not be enough.

Hope that helps and good luck.

 

[BEATAV8]

Many of those high impedance injectors aren't worth a sh!t

 

[michael evans]

You get what you pay for especially when it comes to injectors.

 

[BEATAV8]

You get what you pay for especially when it comes to injectors.

And sometimes you spend $1000 for a set of FIC's that sputter and misfire when they're cold. Lol

I went back to old school SMP 160's and that's where I'm staying.

 

[belsie]

HMMMMMMM...what's a fellow to do???? especially when running E-85 ??

 

[dank GN]

HMMMMMMM...what's a fellow to do???? especially when running E-85 ??

Have your Ecm modded by Bob and then get some low impedance 160s and call it a day. Also need to get a bigger return line and while u r at it get a bigger supply -8 supply -6 return works well. What fuel pump do u have ?

 

[belsie]

All good there (see my sig) DW 300 pump , is the low impedance from Bob B. the only way to go low imp. short of the Fast system? Thanks guys.........

 

[dank GN]

All good there (see my sig) DW 300 pump , is the low impedance from Bob B. the only way to go low imp. short of the Fast system? Thanks guys.........

I belive there are converters kinda like what the Honda guys run . Just google low impedance adaptors