Cometic head gaskets cheap

[dank GN]

Ive have never seen comitics this cheap they are $50 a piece brand new just thought I would share !!

 

[EVIL]

Good find.
It’s always worth having a spare.
That’s probably cheaper than then vendors pay.

D

 

[BEATAV8]

one pair on the way.... tempted to buy 2 pairs! lol

thanks for the heads up Dank GN!

 

[Mike T]

Ordered two sets from Summit yesterday and they price matched this deal....... I'm all for buying from vendors but in this case I couldn't pass it up.

 

[TurboBuRick]

Sweet. Got me a set. Thanks dank!

 

[ddfast1]

Nice me too!!

 

[Eticket]

aren't these thinner than stock?

 

[EVIL]

Thewe are the same thickness that GN1 sells
Its a great deal

D

 

[BEATAV8]

aren't these thinner than stock?

.040" is the standard. thicker cometics are available but not on sale it seems.

 

[87GNSteve]

Are there cometics for 4.1 engines?

 

[BEATAV8]

Are there cometics for 4.1 engines?

yes they have a variety of bore sizes available over 4.000

 

[87GNSteve]

Good find but that price is ONLY, for that size and part number.

 

[ek02]

The Cometics for 4.1's are the regular price at Jeg's right now, unfortunately.

 

[BEATAV8]

The Cometics for 4.1's are the regular price at Jeg's right now, unfortunately.

Yep. Only 1 part number is on sale. Fortunately though it's the most common one to use for a 3.8 motor.

 

[Flyin Brian]

I wish the 060's were that cheap! I need a set but my CR is already 9.1:1 with the 060's and the 040's would make it even higher. So I guess I am stuck paying $250 for a new set of 060's instead of $100 for a set of 040's. Bummer.

 

[Mike T]

Now that I'm stocked up...... they will probably replace these with a new improved version

 

[pacecarta]

I wish the 060's were that cheap! I need a set but my CR is already 9.1:1 with the 060's and the 040's would make it even higher. So I guess I am stuck paying $250 for a new set of 060's instead of $100 for a set of 040's. Bummer.

from your sig you're on e85
i see your on irons but even still e85 would have no problem with the compression being bumped up and would actually welcome the bump

 

[johnplogii]

Thanks for the heads up!

 

[johnplogii]

I wish the 060's were that cheap! I need a set but my CR is already 9.1:1 with the 060's and the 040's would make it even higher. So I guess I am stuck paying $250 for a new set of 060's instead of $100 for a set of 040's. Bummer.

Put the .040's on it

 

[87GNSteve]

Put the .040's on it

Changing gasket thicknesses can bite you in the butt with lifter pre-load issues.