OneQuikSix
Member
- Joined
- Jun 7, 2001
- Messages
- 348
I'm trying to replace all of the old lines, hoses, condenser, compressor, and other items on my A/C system. I'm looking for the proper switches intended for pressures associated with r134 refrigerant. I've managed to obtain all but the following:
1. New Condenser
2. Switch attached to the receiver/dryer
3. Switch in the lines (three wire) near the compressor
4. Switch in the back of the compressor (secured with snap ring)
I acquired the following items this month from the following vendors:
1. Compressor (Car Quest box) and Receiver/Dryer - GBodyParts.com
2. New stainless lines - GBodyParts.com
3. Spectra Condenser part # 7-4013 - Amazon (DID NOT FIT)
Hopefully, this listing will help others in the future as more of these necessary components dry up for our cars. Thank you all!
Chris
1. New Condenser
2. Switch attached to the receiver/dryer
3. Switch in the lines (three wire) near the compressor
4. Switch in the back of the compressor (secured with snap ring)
I acquired the following items this month from the following vendors:
1. Compressor (Car Quest box) and Receiver/Dryer - GBodyParts.com
2. New stainless lines - GBodyParts.com
3. Spectra Condenser part # 7-4013 - Amazon (DID NOT FIT)
Hopefully, this listing will help others in the future as more of these necessary components dry up for our cars. Thank you all!
Chris