Pics of 6162 S cover vs E cover (Turbonetics)

T- Type Tim

Vice Chairman
Joined
Jul 8, 2001
Just got this billet S cover 6162 from Cottons
E cover on top
S cover on bottom

The 4” inlet pipe is a GN1 unit
E0FBE1F0-052D-408F-943B-F831AE833DF6.jpeg
D8D31277-588C-4D75-A681-1A4A74432A51.jpeg
C517870C-1292-45F7-A9A8-217607D17CCB.jpeg
 
Nice turbo...That's the one I run. Spools very well and makes good power. If I was choosing Turbonetics , this is a turbo I would choose for a mildly modified 231 ci .
Excellent match of wheels
 
I liked the E cover 6162 was fun on the street and did well at the track ..... I’m really anxious to see what the S cover does
 
Got er installed
Need a t bolt clamp and a fitting for the oil feed and it’s done

Surprised I didn’t need an IAC angle boss
04843D6D-163C-4927-96A7-00FA83D5496F.jpeg
70E9E2E9-EAD6-44DC-9D86-3010C68C7C83.jpeg
 
I finally got to make a 20 psi hit with this turbo after upgrading the fuel system. The old turbo lived around 25 psi, this one has a faster spool even with a base tune that needs more work. so far so good, and Cottons hooked me up at a great price. This thing definitely is moving more air!
 
What did the E cover run at the track?

Beautiful looking engine compartment.
 
The old turbo lived around 25 psi, this one has a faster spool even with a base tune that needs more work. so far so good,
love the tnetics stuff!it takes a pounding and the billet wheels with the bigger covers make alot of power for their size.i ran a billet 64 and 69mm turbos with the larger t series covers that do really need an angled iac.
 
That e cover has the T61 cast compressor wheel like the older 6131,6152,6176. The tnetics HPC 61 is forged aluminum billet.. Same thing basically... Both 6 blades ...turbonetics shaves the hub down.

I have this same turbo as op..tnetics hpc 6162 bb. Same comp and turbine wheel as the tnetics gtk 600. I like it.
 
the old one went 11.52 with me lifting at the 1000 ft.......no cage definitely a better number was there
 
Sorry to hyjack, just wondering how much power can be made with the tnetics 6165?


Sent from my iPhone using Tapatalk
 
The 62 turbine is a better match for the HPC 61 . Can't see HPC 61 being that much better the cast T61. T61 compressor wheel according to it's compressor map is good for 62#/min . 62 turbine is good between 65-70#min.

I personally think HPC 6162 is about the best match of compressor/turbine.
 
Ha ha good eye there.

Pretty sure when I took that picture I was waiting on a new clamp to ship.
 
Can't see HPC 61 being that much better the cast T61. T61 compressor wheel according to it's compressor map is good for 62#/min .
they make several 61mm comp wheels, if op has an hpc 61 that will outflow any of the others as that is their competition wheel.their stuff is underated from what i have seen so it is hard to get real answers unless you test yourself.should be a bad ass sreeet turbo with a mild motor or even a stock motor.i pushed there 62mm cast wheel and i would expect that hpc 61 to outflow it 10.4-10.6s@130 on the right car
 
they make several 61mm comp wheels,

I'm taking about T61 6 blade it was PTE GT wheel. They have a compressor map for it.

Op HAD tnetics 6162 which has the same comp cast wheel from PTE GT technology. He recently upgraded to hpc 6162.
 
Top