Powerlogger not reading boost?

[JSD69Vette]

I'm just starting to learn to read the PL files and have notice that recordings I've made are not showing the boost levels. I see the wastegate % move around under WOT, I know I'm under boost from my gage, but when I review the file I don't see any recorded levels?

Also, file review show that the closed loop box remains checked throuhout the run, with well over 4v tps?

I just went into the conf page of PL and changed the scanmaster setting to read boost, could that be it?

Additionally, the InHg reads -29.5.

Any thoughts?

 

[Scooter3800]

Did you tap into the MAP sensor and run a wire to the powerlogger?

 

[aminga]

Perchance did you hook up the MAP to the Analog input block?

 

[JSD69Vette]

I did not. Can you please provide some technical assistance on the procedure.

thanks so much!

 

[turbofrank]

Perchance did you hook up the MAP to the Analog input block?

Do you have the block if not order from FT

 

[WLDWST]

This is a great informative link. http://www.vortexbuicks-etc.com/ Look under tech pictures/Instructions. There is a section on Powerlogger MAP hookup.