Presicion Front mount, TH400 conv. and pistons

[turbobitt]

Precision Front mount intercooler, very good shape. Sold as Intercooler only with no pipes - $400 OBO Plus shipping

TH400 precision industries 3500 stall converter. Only 10 passes and limited street miles.

$350 plus shipping

Set of used Stage II JE pistons for,
4.00" bore
3.625 stroke
6.5" rod
.927" pin
Double pin oilers
1.2mm / 1.5mm / 3mm ring grooves
Valve reliefs for stage II head
8.5:1 compression
Pins and support rails not included

$300 plus shipping

Crank Hub for internally ballanced engine.

$80 plus shipping

 

[turbobitt]

Piston pictures

Picture of pistons

 

[charlief1]

What's the pin height of the pistons and how much of a lift are they intended for? I just might be able to use them.

 

[turbobitt]

Pin height is 1.21" and I had about .620 lift with no issues. I don't know what the max allowable lift would be.
Allan G.

 

[charlief1]

Thanks Allen. They're 0.04 to tall for me. Here's another bump for you though.

 

[turbobitt]

There may be enough material to remove .040 ". The rings will just be closer to the deck.

$250 for the pistons takes them. They are a really good piston and in good shape.
Allan G.