So what will happen with Bison's car tomorrow?

[S2V6RACER]

I voted the car won't make a full pass because of issues.


I don't think the starter will allow you to make a pass with empty pizza boxes on the trunk.

 

[Otto J]

All teched and warming warming it up. I looks like rain though..

 

[Otto J]

First pass spun the tires to a 10.35 @ 133 60ft was a 1.62

 

[John Wilde]

You have the 9.9 with just a normal 60ft.
I hope the weather holds out.

 

[Otto J]

10.13 @ 133.4 over reved 2cd gear, 1.48 60
He messed and got no data

 

[Onalky87]

How'd he over rev 2nd?does he have a manual valve body?

1.48 60'!!! I need 29x9 slicks

 

[WH1_T-Type]

Awesome!

 

[Otto J]

No,2004 r with stageright. He didn't have the car in 3rd for the auto shift. he saw 6600 on the tach.One cylinder sounds a little light on compression. Taking it home to check It out.

 

[Onalky87]

:0 oh no!!! Sounds wayyyyyyyy to familiar!!! Please keep us updated. Are you going to look at it tonight or tomorrow?

 

[John Wilde]

I hope this motor did not piss off Brian, "they wouldn't like me when I'm angry"!

 

[bison]

I was about to flog it again but realized it probably wouldn't make it down so I opted to leave. #5 low. I'll tear it down Friday hopefully. We had a problem with the injector harness on #5 when trying to diagnose the low cyl at the track. The power wire easily separated from the connector. Didn't melt anything so it shouldn't be too hard to fix. Wish I waited later to run the air quality improved a lot after darkness. Early it was very humid.

 

[bison]

How'd he over rev 2nd?does he have a manual valve body?

1.48 60'!!! I need 29x9 slicks

That is not a good 60'. I was trying to dial in the two step. The first pass it spun the second it looked like it dropped too much rpm when it left. Should 60' 1.40-1.42 the way it was launched.

 

[ttaowner]

BRIAN CHECKING THINGS OUT BEFORE RUN #1

BRIAN / OTTO / GNBRETT

OTTO TELLING BRIAN TO STOP TEXTING AND GET OUT THERE AND RUN IT !!!!

I HAVE VIDEO BUT IM NOT SURE HOW TO UPLOAD IT

 

[John Wilde]

if you email me the video I can host it on youtube.

 

[SCOOBY DOO]

You guys were having way too much fun.

 

[TurboBob]

email it to me and I will put it on my web page



Bob

(anxiously waiting on the engine diagnosis)

 

[1fast6]

so what do i and the other 19 win? j/k hope everything is well in the motor.

 

[Otto J]

#5 has only 60#s of compression. When diagnosing it at the track one of the injector wires for #5 fell out of the connector.Not sure this may or may not have helped it along. We feel the over rev of second most likely was the issue.All 6 plugs looked perfect.

 

[KevinB]

#5 has only 60#s of compression. When diagnosing it at the track one of the injector wires for #5 fell out of the connector.Not sure this may or may not have helped it along. We feel the over rev of second most likely was the issue.All 6 plugs looked perfect.

Just turn it up or add nitrous. That usually helps those weak cylinders

 

[TurboBuRick]

Aaaa, who needs compression. Just need a little more boost to compensate.

My bet's on a cracked ring.

Keep us posted. :biggrin: