Can't find numbers only see precision

[danomano80]

Can anybody id this for me and point me in direction to reseal hot side, it's leaking out of both sides from previous owner putting together. One bolt is cross threaded and not tight, pretty sure I can fix threads for that. Been looking and looking and can't match this turbo up to any I know or have seen with cold big hot smaller. Thanks in advance

 

[TurboTGuy]

Precision can rebuild it for you, should you want.

 

[danomano80]

Nobody?

 

[V6sleeper]

You would have to measure the wheels to get the turbo size, its common for the covers to be bigger on the cold side, visually from the outside turbos look similar but that looks big i would guess older pte 6765 4" cover precision .63 housing

Reed at Work Turbo fixes older units like that

 

[danomano80]

You would have to measure the wheels to get the turbo size, its common for the covers to be bigger on the cold side, visually from the outside turbos look similar but that looks big i would guess older pte 6765 4" cover precision .63 housing

Reed at Work Turbo fixes older units like that

What would you suggest for bolt in replacement turbo for good street ability?

 

[danomano80]

What would you suggest for bolt in replacement turbo for good street ability?

This info previous owner gave me on trans and converter.
The Trans is a Stage 2 Extreme Automatics built by Lonnie Deers and the converter is a PTC that cost about 3k with all its upgrades

 

[V6sleeper]

9.5 ptc or 10" ptc? big difference , whats the other info on the motor, heads?

 

[Chuck Leeper]

PTC converter will have numbers on the outer edge.