Car is tube chassis big tyre 7.5 sec certified chassis. Motor is stage II Anderson built TSO engine: 153 block, Bryant billet crank, ross pistons, 9.5 cr, carillo rods, edelbrock tunnel ram intake, stage II heads, rev kit, comp cams cam, Moran 500 lbs injectors, Magnafuel MP4703 fuel pumps, Weaver dry sump, ECU is Autronic SM4, turbo is 88mm custom made hybrid Garrett/Holset.
Tranny is PG with 10.5" PTC converter (thumbs up to Dusty
)
Full raceweight is 2270lbs.
Rear gears 4.55. I run 27 psi of boost which drops in the end to 23 lbs (I'm out of turbo AGAIN). Cam has way too much overlap and as I run redline @ 8700 rpm then motor just eats everything you throw at him