Brandon Burnett
New Member
- Joined
- Aug 19, 2012
What will be the main differences, if any, on my setup running a 6262 jb vs a 6266 jb? I am going to call Dusty for a spec'd out PTC 9.5" non lock up and go off the stall he recommends. I changed a little bit in my setup and think I may need a little more compressor. I currently have a Precision 5831 coupled with a 10" Ptc 2800 lock up. I had a minor set back with my transmission so I wanted to step up my setup with my tax refund I've got coming back while I replace the clutches in the tranny. My goal is to realistically easily push it into the upper 10's and be capable of maybe a 10.5 or better with practice and suspension upgrades.
1987 Grand National
stock 3.8 (no girdle and hasn't been bored)
Precision slic
Champion ported iron heads, intake manifold and power plate
Rjc bulletproof hgs with arp bolts
hotwire walbro 340/ 60lb injectors TT chip
Razors alky
Edelbrock 204/214 ft cam lifter preload at 0.035" and rocker arm shaft supports
full exhaust with cutout
And other stuff like braces, coolers, air bags, etc...
1987 Grand National
stock 3.8 (no girdle and hasn't been bored)
Precision slic
Champion ported iron heads, intake manifold and power plate
Rjc bulletproof hgs with arp bolts
hotwire walbro 340/ 60lb injectors TT chip
Razors alky
Edelbrock 204/214 ft cam lifter preload at 0.035" and rocker arm shaft supports
full exhaust with cutout
And other stuff like braces, coolers, air bags, etc...