So what will happen with Bison's car tomorrow?

[Otto J]

So we put together a motor for his Grand National.
It consists of a all original 65K miles bottom end
Comp 212 roller car, Champion aluminum heads ( cleaned up-not race ported)
stock ported intake 66-68 turbo, 3.5 downpipe,4" RJC exhaust.
PTC 9.5 convertor on 29x9 slicks and skinnys.
Front mount with ALky on C16 fuel.

Car made 609 RWHP at 25-26 #s.

Here is the poll

 

[Pronto]

What track will you be at?

 

[Otto J]

Lebanon Valley

 

[CardBoardHero]

I vote he starts on a 9 second pass, gets distracted by a blonde in the stands, scrapes the last 150 feet of the wall, ends up with mid 10s and a need to do bodywork.

 

[bison]

I'm not going there to run 10's. The last 3 selections are the only realistic ones. It will probably make 27-28psi on the pavement. 9.89@136.9mph

 

[rmar]

Out of curiosity.....what's it weigh?

 

[Pronto]

Someone needs to video this.

 

[bison]

Out of curiosity.....what's it weigh?

<3500

 

[NCTURBOS]

Hopefully it runs 9's, 'cause I have a very, very similar project going together...


K.

 

[boostfreak]

9's FTW!! You got the power. I know you can drive (yes?). As long as the track plays nice, it's gonna happen.

 

[SGRIM]

You have my respect already, first time to the track on a stock bottom end run 9's and you will simply amaze me.... Have you ran this car before with a different engine? I now understand what it takes to do that with a full weight car, I can't wait for the results! Good Luck!

 

[bison]

You have my respect already, first time to the track on a stock bottom end run 9's and you will simply amaze me.... Have you ran this car before with a different engine? I now understand what it takes to do that with a full weight car, I can't wait for the results! Good Luck!

I havent made a fullnpass in a long time. The last engine I had in there bad mid 9 sec power. I hurt #1 @ 900ft. Rolled to 10.2 with a 1.8 60'

 

[Otto J]

Ill be the guy at the line holding the pin :biggrin:

 

[TurboBob]

light the fuse!

Bob

(videos would be cool)

 

[Mike Licht]

Since you guys have excellent tuning skills it will run the number and stay together. I had 100+ 10.50ish passes on a 72,000 mile stock shortblock with nothing done to it to make it better just a cam and good heads and intake
Mike

 

[tonysmach]

Was the 609 WHP made with C16 or 93/alky?

 

[TurboDave]

Kick the tires and light the fires!!!!!!!

 

[bison]

Was the 609 WHP made with C16 or 93/alky?

Neither. It was about 2 gallons of 10 month old 93 mixed with 5 gallons of 110. Around 105 octane.

 

[Dusty Bradford]

We ran Chris Hogeland's car very similiar to this car. Stock crank and rods with TRW pistons, out of the box GN1's, 212/206, Limit P trim 70mm, Precision front mount, 9.5 converter. It went 6.2's at 112-114. I'm sure that's 9.80's.

 

[turbocliff]

It should see the 9.80-9.90s with that power / weight / tire. I notice there is no "9 sec passes then drive on trailer" option