Torque Converter

[Turbo RX-6]

I am looking for a converter. Preferably a high stall and used converter. I have a budget right around $300-$400...

 

[3.8L V-8 eater]

I have a new TCI converter that was mocked up on a tranny but not ran...It's a 12" converter and would stall a little higher than a stock D-5....

 

[SHADOWII]

Should be more specific, i.e. 9", stall 3000-3200, etc.
Might check w/gnxjohn, I noticed he was selling a combo in the "for-sale" section, but he may break it up if others were inclined to take the rest of the items.

 

[toofastforyou]

Here: http://www.turbobuick.com/forums/threads/art-carr-cpt-19930-converter.385034/

This converter has low mileage and is in excellent condition, no disappointments. There are pictures in the link I posted above. It is for a 200-4R transmission (which I assume you have)... I ran high 9's with it... Let me know if interested...

Claude.

 

[jdpolzin]

I've got a 10" Ptc 2800-3000 lock up. Less than 100 miles for
$450.

 

[DMOSTWANTED1]

NJ 07111 3200 from dynotech still in trans available $400

 

[proptop]

Sir,
Fast air 6 has one/PTC lockup converter that is in my garage. It was pulled out of his car after a few hundred miles. Not sure of all the details PM him and he should be able to answere all of your questions.
Thanks,
Bob

 

[hungerbuhler1]

I have a TCS 9x11 3000 stall with 2-300 miles on it.

 

[nitron]

I have an 9" 3200 stall Art Carr non lock up for 250 plus the ride

 

[1fastcobra]

CALL R&R CONVERTOR HERE IN ASHEVILLE N.C HE WILL BUILD U WHAT U NEED
LOCK UP / NON LOCK UP HE BUILT MINE ITS A 10" LOCK UP 3600 STALL I HAVE 25 PASSES ON IT
WORKS LIKE A CHARM LET ME KNOW ILL SEND U THE NUMBER