Extreme Methanol and Nitrous Injection

[Alky V6]

This is a pic of a current project I'm finishing up for someone.

 

[Boost231]

someone is not messing around

 

[KEVINS]

Maaannnnnn, I told you not to release those pics!..

ks

 

[3.8L V-8 eater]

......

 

[BEATAV8]

Woof....
!!

 

[jdpolzin]

Jesus Christ almighty! Thats definately "More alcohol than the E85 JDPOLZIN uses!"

 

[Alky V6]

Each electronic injector flows 240 lb/hr.
The port nitrous injection system is jetted for a 315 hp shot.
The turbo used with this is a 91mm/T6. Planned boost level is 40+.

 

[BEATAV8]

Man that thing is gonna be flowing so much liquid! Could it come close to hydraulic lock?

 

[Boost231]

sweet jesus

 

[Alky V6]

Man that thing is gonna be flowing so much liquid! Could it come close to hydraulic lock?

No. Most of the fuel vaporizes during compression.

 

[BEATAV8]

No. Most of the fuel vaporizes during compression.

I hope so! My friend runs a big inch methanol dragster and we had a conversation about this. His engine is around 1000hp but it's also 638 cubic inches of N/A V8 with high compression. We were chatting about how fueling and combustion might compare to a much smaller V6 making good power on straight methanol. For some reason I thought of you ;-)

 

[Alky V6]

I hope so! My friend runs a big inch methanol dragster and we had a conversation about this. His engine is around 1000hp but it's also 638 cubic inches of N/A V8 with high compression. We were chatting about how fueling and combustion might compare to a much smaller V6 making good power on straight methanol. For some reason I thought of you ;-)

Trust me.

 

[TARZAN]

That is gorgeous. Those are some serious injectors. 315 shot is nothing on that setup lol. Is it limited to one stage for a class or anything?

-Will

 

[Alky V6]

That is gorgeous. Those are some serious injectors. 315 shot is nothing on that setup lol. Is it limited to one stage for a class or anything?

-Will

The nitrous is being used to spool the turbo only.

 

[we4Mateo]

The nitrous is being used to spool the turbo only.

315 just for spool! Praise Jebus...

 

[TARZAN]

The nitrous is being used to spool the turbo only.

Ah, ok. that explains it then. I was curious. Nothing spools a turbo faster

-Will

 

[blackgn1]

WOW!! How are the second set of injector bungs mounted? I have always wondered if it was possible to press fit them. Looks clean. Very clean.

 

[Alky V6]

WOW!! How are the second set of injector bungs mounted? I have always wondered if it was possible to press fit them. Looks clean. Very clean.

Epoxied.

 

[blackgn1]

Do you mind to tell what epoxy you used?

 

[Alky V6]

Do you mind to tell what epoxy you used?

Loctite Superior Metal.
Corrosion resistant, high strength epoxy.