On Board Gage

[210 Sport Coupe]

Hi all, is anyone running the TCI pressure gage? Part number 801100 from Jegs.
I can't find any other gage that reads 0-300 psi that I can leave mounted inside.
Electrical or mechanical, what are thoughts of running 300 psi mech gage in the car? I would plan to use the - 4 braided line and install the gage inside the glovebox.
Thanks

 

[TexasT]

I wouldn't want to run a 300 psi shower of hot trans fluid. Not as bad as fuel but really doesn't sound fun to me.
Id look to mount it at the back of the hood like a fp gauge instead of going into the interior. That's just me.
To answer, no I'm not running one of those.

Sent from my HTC PH39100 using TurboBuick Mobile mobile app

 

[210 Sport Coupe]

Thanks TexasT, after some searching and some thought, I found that Autometer has a gage and isolator and VDO has an electric sensor and gage.
Decided only to run the temporary hand held gage to set up then plug the port.
Thanks for the reply.