Winter is here whats everybody's project they got cooking??

Didn't get much done in the TB dept this weekend I did get my new leather interior swapped in my Ford Daily Driver. Here was a pic of the rear waiting to go back in the WE4.
bbed1a2b1d1e5f0aeb577e9908c4529a.jpg



Sent from my iPhone using Tapatalk
 
I've been slowly rebuilding my front end since January, whenever I get done idle time on the weekends.

I'm following the Rebuild For Beginners thread and replacing most of the front suspension. It's somewhere between a lot of fun and a royal pain... Depends on the day. (The spring compressor has been the most annoying.)

Hoped to have it all done by the end of March, but now it looks like mid-April.

On the plus side, the ride couldn't have gotten any worse.
 
Also, wear a mask when you're wire-wheeling the old LCAs... My boogers were black for days.
 
I just take them off and get them blasted the ones on my rear were powdered. Got my fuel lines in Brake line done. Exhaust mounted back up just need to add two J hooks. This will be bolted back up by the end of the week.
fdce404fd6c67d0a19dffc7aaf56e04f.jpg
793714ab373004d9096e70c4d7ebfe01.jpg



Sent from my iPhone using Tapatalk
 
calander says its spring but they are calling for snow saturday

so winter wrenching continues

on the ttop ..
out with the old turbonetics 4bolt 72P S cover (4"in 2.5"out) ... in with a 71HPQ-HP (4" in 3" out) and a custom 3.5 vband .81 4 bolt housing
0326151837.jpg 0326151957.jpg

the X got some new shoes , rears with 255s , ( and correct matching fronts with 245s)
0325151035.jpg
 
Today is the 1st I've seen this thread, great read from start to end. Unfortunately I have nothing to add to the thread.

Chuck
 
I'm still feeling motivated this spring and I still had some money to spend so...full Ridetech suspension is going in this week. Single adjustable coilovers and control arms front and rear. Sway bars front and rear.
5b1c1c857e5dbab03cceb9c1b01be95c.jpg
38ce6a18318f2386d9f0ef87e8cfd66f.jpg
26b4f2d6b93b20aed257421470eb70e0.jpg



Sent from my iPhone using Tapatalk
 
got to play with the ttop saturday night and a little this afternoon
pics should explain
 

Attachments

  • 87ttop ac removed.jpg
    87ttop ac removed.jpg
    486.2 KB · Views: 146
  • 0329150954.jpg
    0329150954.jpg
    674.5 KB · Views: 127
  • 0331151422.jpg
    0331151422.jpg
    647 KB · Views: 125
  • 0331151422b.jpg
    0331151422b.jpg
    634.9 KB · Views: 148
  • 0331151757a.jpg
    0331151757a.jpg
    747.3 KB · Views: 118
  • 0331151758.jpg
    0331151758.jpg
    721.9 KB · Views: 128
Had to order new parking brake cables do not get Raybestos cables they are junk. Crossmember is getting cleaned up new bushings. New trans pan filter/fuild. Still got to weld on some new J hooks on the back to hold the exhaust in places. Hopefully be done in the next two weeks.


Sent from my iPhone using Tapatalk
 
Finally made some headway. New bulbs front and rear ,installed bumper fillers,buffed my cloudy bumpers , got s nice shine now. New tires and brakes are next. Hopefully heading up to see the Dr here in next few weeks. Ocean city Maryland is coming soon.
 
Spicer U joint installed last night. New Dorman parking brake cables came in great fit.
6d57daab43cb0064c5f400c8d4f71f09.jpg



Sent from my iPhone using Tapatalk
 
Top